Entrust Sigma DS3 Installation And Administrator's Guide

2 Printer Installation
Ethernet Requirements
You can connect multiple network printers to one PC. The maximum number of printers depends
on the capacity of the network to deliver data to the printer.
The following components are required to install a printer on a network:
 An Ethernet network that uses the TCP/IP protocol and can run at one of the following:
1Gbase-T (1 gigabyte per second) or 100base-T (100 megabits per second).
 An Ethernet cable to connect the printer to the network. (An Ethernet cable is not supplied
with the printer.)
 A PC that meets the “PC Requirements” on page 1, and is connected to, and communicating
with, the network.
USB Requirements
You can connect up to eight card printers to a PC using USB cables.
To install a printer using a USB connection, the following components are required:
 A high-speed USB port. USB 3.0 is preferred.
 A USB cable to connect the printer to the PC. A USB cable is supplied with the printer.
 A PC that meets the “PC Requirements” on page 1.
If you need to connect two card printers to a PC with one USB port, use a single, independently
powered USB hub to which you can connect both printers.
Electrical Requirements
The power supply detects the input voltage and works within the range stated.
Electrical Requirements
Input Output
Universal 100–200Vac, single-phase/
50–60 Hz/1.6Amp
24V/3.0Amp/72W
If your system includes additional components, refer to the documentation for the
appropriate component for its electrical requirements.

Entrust Sigma DS3 Specifications

General

Print Resolution	300 dpi
Card Capacity Input Hopper	100 cards
Card Capacity Output Hopper	25 cards
Power Supply	100-240 VAC, 50/60 Hz
Print Technology	Dye sublimation
Print Capabilities	Single or dual-sided
Card Thickness	0.010 inches to 0.040 inches
Supported Card Sizes	CR80 (85.6 mm x 54 mm)
Connectivity	USB and Ethernet
Operating System Support	Windows 7, 8, 10, Server 2008, 2012, 2016
Weight	5.49 kg (12.1 lbs)
Operating Temperature	15°C to 35°C (60°F to 95°F)
Operating Humidity	20% to 80% (non-condensing)
Print Speed	Up to 250 cards per hour (YMCKT)