Entrust Sigma DS3 Installation And Administrator's Guide

58 Supplies and Parts
Power Cords
The power cords connect the power supplies for the printer, and any attached component, to the
facility power. Be sure to use power cords that ground to the facility power source.
The following country-specific power cords are available:
 USA Power cord
 Australia power cord
 Brazil power cord
 China power cord
 Denmark power cord
 European power cord
 India power cord
 Israel power cord
 Italy power cord
 Japan power cord
 South Africa power cord
 Swiss power cord
 United Kingdom power cord

Entrust Sigma DS3 Specifications

General

Print Resolution	300 dpi
Card Capacity Input Hopper	100 cards
Card Capacity Output Hopper	25 cards
Power Supply	100-240 VAC, 50/60 Hz
Print Technology	Dye sublimation
Print Capabilities	Single or dual-sided
Card Thickness	0.010 inches to 0.040 inches
Supported Card Sizes	CR80 (85.6 mm x 54 mm)
Connectivity	USB and Ethernet
Operating System Support	Windows 7, 8, 10, Server 2008, 2012, 2016
Weight	5.49 kg (12.1 lbs)
Operating Temperature	15°C to 35°C (60°F to 95°F)
Operating Humidity	20% to 80% (non-condensing)
Print Speed	Up to 250 cards per hour (YMCKT)