Entrust Sigma DS3 Installation And Administrator's Guide

1
Sigma DS1, DS2, and DS3 Card Printers Installation and Administrator’s Guide 1
Chapter 1: Printer Installation
This chapter describes system requirements and provides setup
instructions for the Sigma DS1, DS2, and DS3 Card Printers.
Your installation may have additional requirements for a card production environment. Consult
your system administrator to determine the optimum location for card production.
PC Requirements
Use a PC that meets or exceeds the following:
 A 32- or 64-bit processor, running at 2 GHz or faster.
 4 GB or more memory (RAM) and at least 1 GB free space on the hard drive.
 One of the following operating systems:
 Supported Windows 10 versions, 32- and 64-bit
 Windows 8.1, 32- or 64-bit
 Windows Server 2019
 Windows Server 2016
 Windows Server 2012, R2, 64-bit
 A USB 3.0, Ethernet, Wi-Fi, or Cloud connection.
 ID software or other software to design the card and organize the data to print on each card.
For Card Printer Driver installation troubleshooting and card production
troubleshooting information, refer to the XPS Card Printer Driver User’s Guide and
the printer’s User’s Guide.

Entrust Sigma DS3 Specifications

General

Print Resolution	300 dpi
Card Capacity Input Hopper	100 cards
Card Capacity Output Hopper	25 cards
Power Supply	100-240 VAC, 50/60 Hz
Print Technology	Dye sublimation
Print Capabilities	Single or dual-sided
Card Thickness	0.010 inches to 0.040 inches
Supported Card Sizes	CR80 (85.6 mm x 54 mm)
Connectivity	USB and Ethernet
Operating System Support	Windows 7, 8, 10, Server 2008, 2012, 2016
Weight	5.49 kg (12.1 lbs)
Operating Temperature	15°C to 35°C (60°F to 95°F)
Operating Humidity	20% to 80% (non-condensing)
Print Speed	Up to 250 cards per hour (YMCKT)