Entrust Sigma DS3 Installation And Administrator's Guide

56 Supplies and Parts
Cleaning Supplies
All print ribbon kits include a cleaning card. Ribbon kits with a replaceable print ribbon also
include a replaceable cleaning roller. For best results, keep additional cleaning supplies on hand.
The following additional cleaning supplies are available:
Replacement Parts and Optional Equipment
The following items are available for the printer.
Print Ribbon Cartridge
The ribbon cartridge holds the print ribbon and the replaceable
cleaning roller in the printer.
125-Card Input Hopper
You can purchase additional 125-card input hoppers. The input hopper is removable allowing you
to load different cards types in each hopper.
Cable Lock
The printer can be used with a cable lock. Obtain the lock from your dealer, because it includes an
added security plate that is inserted into the printer.
Supply Description
Isopropanol cleaning
cards
Pack of 10 double-sided, isopropanol-coated cleaning cards
used to clean the printer card track and transport rollers.
Cleaning rollers Pack of 5 replaceable, adhesive-coated cleaning rollers, used
with the print ribbon cartridge.
Cleaning swabs Pack of 5 isopropanol-saturated cleaning swabs to clean
debris and dust from the printhead and from hard-to-reach
internal areas of the printer.

Entrust Sigma DS3 Specifications

General

Print Resolution	300 dpi
Card Capacity Input Hopper	100 cards
Card Capacity Output Hopper	25 cards
Power Supply	100-240 VAC, 50/60 Hz
Print Technology	Dye sublimation
Print Capabilities	Single or dual-sided
Card Thickness	0.010 inches to 0.040 inches
Supported Card Sizes	CR80 (85.6 mm x 54 mm)
Connectivity	USB and Ethernet
Operating System Support	Windows 7, 8, 10, Server 2008, 2012, 2016
Weight	5.49 kg (12.1 lbs)
Operating Temperature	15°C to 35°C (60°F to 95°F)
Operating Humidity	20% to 80% (non-condensing)
Print Speed	Up to 250 cards per hour (YMCKT)