EasyManuals Logo

Enviro Q1LI User Manual

Enviro Q1LI
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
Figure 14: Remote Control with Aux (not used)
Key lock
This function will lock the keys to avoid unsupervised
operation. To activate this function, press the MODE
and UP keys at the same time and the a lock will
appear (see Figure 15). To de-activate this function,
press the MODE and UP Keys at the same time.
Low Battery Power Detection
Transmitter: The life span of the remote control
batteries depends on various factors: quality of
the batteries used, the number of ignitions of
the appliance, the number of changes to the
room thermostat set point, etc. When the
Transmitter batteries are low, a Battery Icon will
appear on the LCD display of the Transmitter
(see Figure 16) before all battery power is lost.
When the batteries are replaced this Icon will
disappear.
IFC: The life span of the IFC batteries depends on
various factors during a prolonged power outage:
quality of the batteries used, the number of ignitions
of the appliance, the number of changes to the room
thermostat set point etc. When the IFC batteries are
low, No “beep” will be emitted when it receives an
On/Off command from the Transmitter. This is an
alert for a low battery condition for the IFC. When the
batteries are replaced the “beep” will be emitted from
the Receiver when the ON/OFF Key is pressed (See
InItIalIzIng the system for the fIrst tIme).
Figure 15: Remote Control
Locked.
Figure 16: Low Battery
Indicator.
WARNING: Fire Hazard. Can cause severe injury or death The Receiver causes ignition of the appliance.
The appliance can turn on suddenly. Keep away from the appliance burner when operating the remote
system or activating manual by pass of the remote system.
WARNING: Shock Hazard. Can cause severe injury or death. This device is powered by line voltage. Do
not try to repair this device. In no way is the enclosure to be tampered with or opened. Disconnect from
line voltage before performing any maintenance.
WARNING: Devices rated more than 5A shall not be connected to the OUT receptacle. Devices rated
more than 1A shall not be connected to the FAN receptacle. Devices rated more than 2A shall not be
connected to the AUX receptacle.
CAUTION: Property Damage Hazard. Excessive heat can cause property damage. The appliance can stay
lit for many hours. Turn off the appliance if it is not going to be attended for any length of time. Always
place the Transmitter where children cannot reach it.
Operating Instructions
Fan Control
The Q1LI comes with a convection fan that can be
controlled with the Transmitter. The fan speed can be
adjusted thorugh six (6) speeds. To control the fan
press the MODE key (Figure 5) to index to the fan
control icon (Figure 13). Use the UP/DOWN arrow keys
to turn on, off, or adjust the fan speed (Figure 13). A
single beep from the IFC will conrm the command
has been received
Figure 13: Fan Control
13

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Enviro Q1LI and is the answer not in the manual?

Enviro Q1LI Specifications

General IconGeneral
BrandEnviro
ModelQ1LI
CategoryIndoor Fireplace
LanguageEnglish

Related product manuals