16
REV. 09/2020
17
REV. 09/2020
MAINTENANCE MAINTENANCE
2 2
Table 2.1 Inspection & Maintenance List (Continued)
Interval in days/months/years 7 d 60 d 90 d 6 m 1y
Interval in hours 50 250 500 1000 2000
Other
Check tire pressure
A
Check the xation of battery and battery tray
A
Check the seat xation and adjustment functions A
Check the seat belt and functions A
Check the overhead guard and cabin A
Checking covering parts for damages A
Check if the optional features are functioning properly A
A = Check / Adjust
Please refer to Inspection & Maintenance List
for regular inspection and maintenance of the
vehicles.
L = Lubrication
Under harsh conditions, the lubrication intervals
should be shortened by half.
-
-
2.2.3 Lubrication
Improper operations may constitute hazards
to the operator's health and life, as well as to
the surrounding environment.
When storing or adding lubricant, use clean
containers. It is strictly forbidden to mix
dierent types and specications of lubricants
with each other (except for those can be
mixed under clear statement).
The use and disposal of lubricants must be
carried out in strict accordance with the manufa-
cturer's regulations.
Lubricant
Please see Table 2.2 for the lubricants used in
this truck.
CAUTION
2000-hour
1000-hour
Steering Axle
Gear Box
Bearing
Mast Pin Shafts
Mast Pin Shafts
Oil Tank
Bearing
Drive axle
Brake Fluid
Adding Grease
Changing
Hydraulic Oil
Changing Gear Oil
Gear Oil Checks
Brake Fluid Checks
Mast