Epec CAN Module Family
2024 CONTROL MODULE
32 / 34
07.10.2010
2024G08,G18 / MAN000185
Epec Oy reserves all rights for improvements without prior notice
Epec Oy Postiosoite/Postal address Puhelin/Phone Fax Internet
Tiedekatu 6 PL/P.O.Box 194 +358-(0)20-7608 111 +358-(0)20-7608 110 www.epec.fi
FIN-60320 Seinäjoki FIN-60101 Seinäjoki, Finland
7 HOUSING
• Closed light cast aluminium housing
• Powder-painted, hexavalent chromium free passivation for aluminium
• Puncture hole fastening
7.1 Mounting
• 2 pieces of M6 screws to DIN 912
• If a separate Epec module shock protection cover is mounted, it is recommended to use
Epec fastening bolts which are delivered with the cover
• Mounting position horizontal or vertical to allow water etc. flowing away from connectors:
• See the General Mounting and Cabling Instructions for Epec Modules for more detailed
information about the module mounting
Module
position
Mounting
base
Module
position
Mounting
base
To Next Page
Loading...