Epec CAN Module Family
2024 CONTROL MODULE
5 / 34
07.10.2010
2024G08,G18 / MAN000185
Epec Oy reserves all rights for improvements without prior notice
Epec Oy Postiosoite/Postal address Puhelin/Phone Fax Internet
Tiedekatu 6 PL/P.O.Box 194 +358-(0)20-7608 111 +358-(0)20-7608 110 www.epec.fi
FIN-60320 Seinäjoki FIN-60101 Seinäjoki, Finland
so that the machine operator has the right information how to operate the machine correctly and
safely.
This product is designed to be used only for machine controlling purposes. The manufacturer
does not assume any responsibility for this product being fit for any particular application, unless
otherwise expressly stated in writing by the manufacturer.
This product complies with those certifications and standards that are listed below. The
manufacturer does not guarantee that this product complies any other certification, standard or
test than listed below.
This product is not field serviceable, so it should not be opened at any situation.
An external fuse should be installed for the product or the system power supply.
The system should be designed and constructed according to the Epec general mounting and
cabling instruction document.
Epec Oy reserves a right to improve its products without a further notice.
1.6 Warranty
The manufacturer does not assume any responsibility for the products being fit for any particular
purpose, unless otherwise expressly stated in writing by the manufacturer.
The manufacturer gives the warranty of twelve (12) months to the products and thereto related
firmware from commissioning or eighteen (18) months from the date of delivery of the products
which ever occurs first
The manufacturer is during the warranty period responsible for defects in the products and
thereto related firmware resulting from faults in material, design or workmanship. The
manufacturer’s only obligation under this warranty is to, at its sole discretion, either to replace
the products and/or thereto related firmware or to repair the defective products. The
manufacturer shall, at its sole option, repair the products at its manufactory in Seinäjoki,
Finland.
The warranty does not cover any costs related to removing or fastening of devices related to the
products. Neither does the warranty cover the expenses of sending devices to or from the
manufacturer for repairs. The warranty does not cover possible expenses relating to travelling,
accommodation, daily benefits, etc. of installers.
The warranty becomes null and void if the buyer and/or a third party alters the products or the
firmware in any way or if they are not used in accordance with the Manufacturer’s operating
instructions.
All claims with respect to defects in the products shall be made to the manufacturer without
delay and no later than on the seventh (7th) day after the defect has been or should have been
discovered by the buyer. The manufacturer strives to reply to the claim in writing within two (2)
weeks from the receipt of the claim. The buyer shall attach to the claim a possible error report or
equivalent explanation of the grounds for the claim.
The manufacturer gives no other warranties whatsoever for the products than the warranty set
out in this section and thus the warranty given in this section sets forth the warranty given by the
manufacturer in its entirety.
To Next Page
Loading...
Need help?
General
