Epson BrightLink 1485Fi+ - Page 278

278
Setting Options Description
A/V Output While Projecting
Always On
Determines when the projector outputs
audio and images to external devices; set to
Always On to output audio and images
when the projector is not projecting any
images
Inverse Audio On
Off
Set to On to invert the audio's left and right
channels to match the projector's
installation position
Audio Output Auto
Audio
Audio1
Audio2
Sets the audio input port when projecting
from input sources other than HDMI,
HDBaseT (BrightLink 1485Fi+), LAN, and
Screen Mirroring
HDMI Audio Output HDMI1
HDMI2
HDMI3
Sets the audio input port when projecting
from one of the HDMI ports
Monitor Out Port Monitor Out
Computer2
Selects the function of the
Computer2/Monitor Out port
Monitor Out: select this option when
outputting an image signal to an external
monitor
Computer2: select this option when
inputting an image signal from a computer
USB Display On
Off
Set to On to enable the USB Display feature
for a computer connected to the USB-B1
port