❏ Do not cover with bedding.
❏ Do not allow dust or other foreign material to adhere to the power plug. Otherwise electric shock or
re
may
occur.
❏ Insert the power plug securely all the way into the outlet. Otherwise electric shock or re may occur.
❏ Do not use a power cord other than that supplied with the product. In addition, do not use the supplied power
cord with another device. Otherwise electric shock or re may occur.
❏ Do not use a damaged power cord. Otherwise electric shock or re may occur. Contact qualied service
personnel for advice if the power cord is damaged. Furthermore, observe the following points so as not to
damage the power cord.
❏ Do not modify the power cord.
❏ Do not place heavy objects on the power cord.
❏ Do not forcibly bend, twist, or pull the power cord.
❏ Do not lay the power cord near a heating appliance.
❏ Do not insert or remove the power plug with a wet hand. Doing so may cause electric shock.
❏ Do not connect many power cords to one outlet. Doing so may cause re. Supply power directly from a power
outlet.
❏ Regularly disconnect the power plug from the outlet and clean the base of the prongs and between the prongs.
Leaving the power plug connected to the outlet for a long period of time may cause dust to accumulate on the
base of the power plug prongs, resulting in a short and
re.
❏ Hold the plug and do not pull the cord when disconnecting the power plug from the outlet. Pulling the cord
may damage the cord or deform the plug, causing electric shock or
re.
❏ Do not remove and insert the power plug from/to the outlet while the printer is powered on. Doing so may
cause electric shock.
!
Caution
To ensure safety, unplug the product before leaving it unused for an extended period.
CW-C4000 Series User’s Guide
Before use
10
To Next Page
Loading...
Need help?
General
