Part Names and Functions
is section describes the main operation parts.
Front
No. Name Description
1 Release lever Pull this lever towards you to open the front cover.
2
Lock lever (paper ejection guides) Press down this level to enable adjustment of the paper ejection guides.
Pull up this lever until it clicks into place to lock the paper ejection guides.
3
Maintenance box cover Open this cover to install or replace the maintenance box.
U “Replacing the Maintenance Box” on page 32
4 Front cover Open this cover to load or replace paper.
5
Ink cartridge cover Open this cover to install or replace the ink cartridge.
U “Replacing the Ink Cartridges” on page 29
6
Paper ejection guides These guides are for preventing the paper from getting out of position
when ejected. Adjust them to match the paper width.
CW-C4000 Series User’s Guide
Before use
19
To Next Page
Loading...
