Epson CW-C4000 Series User Manual

Forms of paper Paper shapes Paper
width
(mm)
Backing
paper
width
(mm)
Label
width
(mm)
Gap
between
labels
(mm)
Die-cut label
without black marks
*1
Fanfold paper
--- 50 to 112 46 to 108 2.0 to 6.0
Wristband paper
without black marks
*1
Roll paper
Contact
qualied
service
personnel
for advice.
--- --- ---
*1: The print position is detected based on the black marks printed on the back of the paper.
*2: The print position is detected based on the gaps between labels.
Note
❏ When labels less than 10 mm in length are cut automatically, the printed label may adhere to the
cutter blade and become dicult to remove.
❏ Depending on shape, thickness, and stiness of die-cut labels, the labels may peel o their
backing paper inside the printer. When you want to use die-cut labels that do not meet the paper
specications, contact qualied service personnel for advice.
Paper Types
Supported paper types vary depending on the type of black ink as shown below.
Paper Type When using Matte Ink When using Gloss Ink
Plain paper
✓
-
Matte paper
✓✓
Texture Paper
✓
-
Synthetic
✓✓
Wristband paper
✓
-
Glossy paper -
✓
Glossy Film -
✓
High Glossy Paper -
✓
CW-C4000 Series User’s Guide
Before use
16

Epson CW-C4000 Series Specifications

General

Brand	Epson
Model	CW-C4000 Series
Category	Label Maker
Language	English