EasyManuals Logo

Epson EB-410W User Manual

Epson EB-410W
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
List of Functions
31
Network Menu
When "Network Protect" is set to "On" in "Password Protect", a message is displayed and the settings cannot be changed. You can make changes after
setting "Network Protect" to "Off". s p.20
Sub Menu Function
Wired LAN You can make network settings.
DHCP: You can set whether to use DHCP (On) or not (Off).
If this is set to "On" you cannot set any more addresses.
IP Address: You can input the IP address assigned to the projector.
*1
You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
0.0.0.0, 0.x.x.x, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet Mask: You can input the Subnet Mask for the projector.
*1
You can enter a number from 0 to 255 in each field of the address. However, the following subnet masks cannot be used.
0 to 254.x.x.x. 255.255.255.255
Gateway Address: You can input the IP address for the gateway for the projector.
*1
You can enter a number from 0 to 255 in each field of the address. However, the following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
MAC Address: You can input the MAC Address for the projector.
PJLink Password Enter a password to use when you access the projector using compatible PJLink software.
*1
s p.68
You can enter up to 32 alphanumeric characters.
Web Control
Password
Enter a password to use when making settings and controlling the projector using Web control.
*1
You can enter up to 8 alphanumeric characters.
Web control is a computer function that allows you to set up and control the projector by using the Web browser on a computer on which EMP
Monitor is running. sEMP Monitor Operation Guide

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-410W and is the answer not in the manual?

Epson EB-410W Specifications

General IconGeneral
Matrix size0.56 \
Number of colors16.78 million colors
Projection distance0.62/7.83 m
Projection technologyLCD
Contrast ratio (typical)500:1
Screen size compatibility30 - 300 \
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical-15 - 15 °
Throw ratio0.48 - 0.65:1
Focal length range6.48 mm
Lamp typeUHE
Lamp power170 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)4000 h
RMS rated power10 W
Number of built-in speakers1
Dimensions (WxDxH)258 x 327 x 95 mm
Power requirements100-240 V AC ± 10%, 50/60 Hz
Connectivity technologyWired
Serial interface typeRS-232
Noise level28 dB
Power consumption (standby)5.5 W
Power consumption (typical)236 W
Operating temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Weight3600 g

Related product manuals