EasyManuals Logo

Epson EB-410W User Manual

Epson EB-410W
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
List of Functions
34
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status of the projector. Items displayed vary depending on the image signal currently
being projected as shown in the following screen shots.
Sub Menu Function
Lamp Hours You can display the cumulative lamp operating time
*
.
When it reaches the lamp warning time, the characters are displayed in yellow.
Source You can display the input port name for the connected equipment currently being projected.
Input Signal You can display the content of "Computer1" or "Computer2" set in the "Signal" menu according to the "Source".
Resolution You can display the input resolution.
Video Signal You can display the content of "Video Signal" set in the "Signal" menu.
Refresh Rateg You can display the refresh rate.
Syncg Info You can display the image signal information.
This information may be needed if service is required.
Status This is information about problems that have occurred on the projector.
This information may be needed if service is required.
* The cumulative use time is displayed as "0H" for the first 10 hours. After 10 hours or more, one hour is added for each subsequent hour.
Computer image/Component videog Composite videog/S-videog

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-410W and is the answer not in the manual?

Epson EB-410W Specifications

General IconGeneral
Matrix size0.56 \
Number of colors16.78 million colors
Projection distance0.62/7.83 m
Projection technologyLCD
Contrast ratio (typical)500:1
Screen size compatibility30 - 300 \
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical-15 - 15 °
Throw ratio0.48 - 0.65:1
Focal length range6.48 mm
Lamp typeUHE
Lamp power170 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)4000 h
RMS rated power10 W
Number of built-in speakers1
Dimensions (WxDxH)258 x 327 x 95 mm
Power requirements100-240 V AC ± 10%, 50/60 Hz
Connectivity technologyWired
Serial interface typeRS-232
Noise level28 dB
Power consumption (standby)5.5 W
Power consumption (typical)236 W
Operating temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Weight3600 g

Related product manuals