EasyManuals Logo

Epson EB-410W User Manual

Epson EB-410W
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
List of Functions
33
*2 When the Mail Notification function is set to "On" and a problem or warning occurs with a projector, the following mail is sent.
Subject: EPSON Projector
First line: The name of the projector where the problem has occured
Second line: The IP address set for the projector where the problem has occured
Third line and on: Details of the problem
The details of the problem are listed line by line. The following table explains the details shown in the message.
For details on dealing with problems, see "Reading the Indicators".s p.38
Message Cause
Internal error Internal Error
Fan related error Fan Error
Sensor error Sensor Error
Lamp timer failure Lamp Failure
Lamp out Lamp Error
Lamp cover is open. Lamp Cover Open
Internal temperature error
High Temp Error
(Overheating)
High-speed cooling in
progress
High Temp Warning
Lamp replacement
notification
Replace Lamp
No-signal
No signal
No image signal is being input to the
projector. Check the connection status
and the power supply to connected
equipment.
A (+) or (-) will appear at the start of the message.
(+): A projector problem has occured
(-): A projector problem has been dealt with

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-410W and is the answer not in the manual?

Epson EB-410W Specifications

General IconGeneral
Matrix size0.56 \
Number of colors16.78 million colors
Projection distance0.62/7.83 m
Projection technologyLCD
Contrast ratio (typical)500:1
Screen size compatibility30 - 300 \
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical-15 - 15 °
Throw ratio0.48 - 0.65:1
Focal length range6.48 mm
Lamp typeUHE
Lamp power170 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)4000 h
RMS rated power10 W
Number of built-in speakers1
Dimensions (WxDxH)258 x 327 x 95 mm
Power requirements100-240 V AC ± 10%, 50/60 Hz
Connectivity technologyWired
Serial interface typeRS-232
Noise level28 dB
Power consumption (standby)5.5 W
Power consumption (typical)236 W
Operating temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Weight3600 g

Related product manuals