Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Mode Application
Dynamic
Ideal for use in a bright room. This is the brightest mode,
and reproduces shadow tones well.
If you are worried about image delays during projection
for games involving speed, try turning off Progressive in
the Configuration Menu. s p.59
Presentation
Ideal for making presentations using color materials in a
bright room.
Theatre
Ideal for watching films in a dark room. Gives images a
natural tone.
Photo
(When the computer image input and the Source are
USB or LAN.)
Ideal for projecting still pictures, such as photos, in a
bright room. The images are vivid and brought into
contrast.
Sports
(When Component Video, S-Video, or composite video
images are input)
Ideal for watching TV programs in a bright room. The
images are vivid and brought to life.
sRGB
g
Ideal for images that conform to the sRGB color
standard.
Blackboard
Even if you are projecting onto a Blackboard
(greenboard), this setting gives your images a natural
tint, just like when projecting onto a screen.
Whiteboard
Ideal for making presentations using the whiteboard.
Procedure
Remote Control
Each time you press the button, the Color Mode name is displayed on the
screen and the Color Mode changes.
If you press the button while the Color Mode name is displayed on the
screen, it changes to the next Color Mode.
q
The color mode can also be set using Color Mode in the Image menu
from the Configuration Menu. s p.58
Functions for Enhancing Projection
33
To Next Page
Loading...
Need help?
General
