Basic menu
EB-826WH/825H/85H EB-84H/84L
Sub Menu Function
Projector Name
Displays the projector name used to identify the projector when connected to a Network.
When editing, you can enter up to 16 single-byte alphanumeric characters.
PJLink Password
Set a Password to use when you access the projector using compatible PJLink software. s p.106
You can enter up to 32 single-byte alphanumeric characters.
Web Control Password
Set a password to use when making settings and controlling the projector using Web Control. You can enter up to 8 single-byte alphanumeric characters.
Web Control is a computer function that allows you to set up and control the projector by using the Web browser on a computer connected on a
Network. s p.48
Projector Keyword
(EB-826WH/825H/85H only)
When set to On, you have to enter the Keyword when you try to connect the projector to a computer on a Network. As a result, EasyMP Network
Projection can prevent presentations from being interrupted by unscheduled connections from a computer during projection.
Normally this should be set to On. s EasyMP Network Projection Operation Guide
List of Functions
67
To Next Page
Loading...
Need help?
General
