By setting the Mail Notification function from the projector's Configuration
Menu, notification messages will be sent to the preset Email Addresses
when a problem or warning occurs with a projector. This will enable the
operator to be notified of problems with projectors even at locations away
from the projectors.
s
p.65, p.73
q
• Up to a maximum of three notification destinations (Addresses) can
be recorded, and notification messages can be sent to all three
destinations at once.
• If a projector develops a critical problem and suddenly stops
working, it may not be able to send a message notifying an operator
of the problem.
• Monitoring is possible if Communication On is set from the
Extended menu of the projector's Configuration Menu, even if the
projector is in Standby Mode (when the power is off).
Using the Mail Notification Function to Report Problems
50
To Next Page
Loading...
Need help?
General
