By setting SNMP from the projector's Configuration Menu, notification
messages are sent to preset computers when a problem or warning occurs
with a projector. This is useful when controlling projectors collectively at a
point distant from them.
s p.65, p.74
q
• SNMP should be managed by a network administrator or someone
who is familiar with the network.
• The SNMP function to monitor projectors requires SNMP Manager
to be installed on the computer.
• The managing function using SNMP cannot be used via a Wireless
LAN in Quick Connection Mode.
• Up to two destination IP addresses can be saved.
Management Using SNMP
51
To Next Page
Loading...
Need help?
General
