Changing the Aspect for computer images (EB-825H/824H/85H/84H/84L)
You can change the Aspect as follows.
Set Values Operation Projection example
Normal
Projects to the full projection size retaining the Aspect of the
input image.
4:3
Projects to the full projection size at an Aspect of 4:3. This is
ideal for when you want to project images at an Aspect of 5:4
(1280 x 1024) to the full projection size.
When a 1280x1024 signal is input
16:9
Projects at a 16:9 Aspect. This is ideal for projecting at full
screen size when using a 16:9 screen.
When a 1280x1024 signal is input
q
If parts of the image are missing, set Wide or Normal in Resolution from the Configuration Menu depending on the size of the computer panel.
s p.59
Functions for Enhancing Projection
37
To Next Page
Loading...
Need help?
General
