Epson EH-LS650W User Manual

Projector Placement
17
a
If you cannot install the projector squarely facing the screen, correct
any resulting keystone distortion using the button on the
remote control. For the best quality images, we recommend adjusting
the installation position of the projector to achieve the correct image
size and shape.
Warning
Do not install the projector in a location subject to high levels of dust or humidity,
or in a location subject to smoke or steam. Otherwise, it could cause a fire or
electric shock to occur.
Warning
• Do not cover the projector's air intake or air exhaust vents. If the vents are
covered, the internal temperature could rise and cause a fire.
• Do not use or store the projector in locations where it will be subject to dust or
dirt. Otherwise, the quality of the projected image may decline, or the air filter
may become clogged, resulting in a malfunction or fire.
• Do not install the projector on an unstable surface or in a location beyond the
weight specifications of the projector. Otherwise, it could fall or topple causing
an accident and injury.
• When installing the projector in a high position, take measures to prevent falling
by using wires to ensure safety in an emergency, such as an earthquake, and to
prevent accidents. If it is not installed correctly, it could fall causing an accident
and injury.
• Do not install in locations where salt damage could occur, or in locations subject
to corrosive gas such as sulphuric gas from hot springs. Otherwise, corrosion
could cause the projector to fall. It could also cause the projector to malfunction.
Attention
• Make sure you do not operate the projector in the following positions.
• Do not operate the projector on its side.
• Do not project images straight up or straight down.
• Do not tilt the projector right or left.
• If you are using the projector at altitudes above 1,500 m, set the High Altitude
Mode setting to On in the projector's menu to ensure the projector's internal
temperature is regulated properly.
s Settings > High Altitude Mode
gg Related Links
• "Precautions on Installation" p.17
Precautions on Installation
Installation space
Attention
Be sure to leave the following amount of space around the projector so as not to
block the air exhaust and intake vents.
A
10 cm
B
30 cm

Epson EH-LS650W Specifications

General

Matrix size	0.62 \
Heat dissipation	897.6 BTU/h
Number of colors	1.07 billion colors
Native aspect ratio	16:9
Projection technology	3LCD
Contrast ratio (typical)	2500000:1
Screen size compatibility	60 - 120 \
Projector native resolution	4K (4096x2400)
Projector brightness (economic mode)	1800 ANSI lumens
Interactive	No
Noise level	36 dB
Noise level (economic mode)	23 dB
Compatible operating systems	Android
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG)
Light source type	Laser
Service life of light source	- h
Focus	-
Throw ratio	0, 25 - 0, 62:1
Fixed focal length	3.7 mm
USB 2.0 ports quantity	3
VGA (D-Sub) ports quantity	0
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Placement	Floor
Product color	White
Market positioning	Home cinema
Cable lock slot type	Kensington
Video color modes	Cinema, Dynamic, Natural, Vivid
Analog signal format system	Not supported
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (standby)	- W
Power consumption (typical)	234 W
Power consumption (economy mode)	178 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
RMS rated power	20 W

Weight and Dimensions

Depth	400 mm
Width	467 mm
Height	153 mm
Weight	7400 g