Correcting Distortion in the Image
29
When the projected image is curved or not rectangular, you can correct
distortion in the projected image by following the on-screen instructions.
After correction, your image is slightly smaller.
a
To correct distortion more easily, you can use the Epson Setting
Assistant application on a smart phone or tablet that has a camera
function. Install the application by using the QR code displayed on the
projected screen. The customer is responsible for any communication
charges incurred when downloading the app.
a
Turn on the projector and display an image.
b
Press the button on the remote control.
c
While looking at the marks at the upper right and upper left of the
screen, adjust the focus using the focus lever.
d
Follow the on-screen instructions to correct distortion in the image.
a
You can use the button on the remote control to close the
menus.
To Next Page
Loading...
