Epson EH-LS650W User Manual

Turning On the Projector
26
When you connect the video equipment to the projector, turn on the video
equipment you want to use after you turn on the projector.
a
Connect the power cord to the projector's power inlet and plug it into
an electrical outlet.
The projector enters standby mode. This indicates that the projector is
receiving power, but is not yet turned on.
b
Press the power button on the projector or remote control to turn on
the projector.
The status indicator flashes blue as the projector warms up. Once the
projector is warmed up, the status indicator stops flashing and turns
blue.
The first time you turn on the projector, the remote control pairing
screen and initial setup screen are displayed. Follow the on-screen
instructions to complete the settings.
Warning
• Never look into the projector lens when the light source is on. This can damage
your eyes and is especially dangerous for children.
• When turning on the projector at a distance using the remote control, make sure
there is no one looking into the lens.
• During projection, do not block the light from the projector with a book or other
objects. If the light from the projector is blocked, the area on which the light
shines becomes hot which could cause it to melt, burn, or start a fire. Also, the
lens may get hot due to the reflected light which could cause the projector to
malfunction. To stop projection, turn off the projector.
a
When using at an altitude of 1,500 m or more, set High Altitude Mode
to On.
s Settings > High Altitude Mode
gg Related Links
• "Projector Feature Settings - Settings Menu" p.67
• "Setting Up Android TV on the Projector" p.23
• "Projector Parts and Functions" p.9

Epson EH-LS650W Specifications

General

Matrix size	0.62 \
Heat dissipation	897.6 BTU/h
Number of colors	1.07 billion colors
Native aspect ratio	16:9
Projection technology	3LCD
Contrast ratio (typical)	2500000:1
Screen size compatibility	60 - 120 \
Projector native resolution	4K (4096x2400)
Projector brightness (economic mode)	1800 ANSI lumens
Interactive	No
Noise level	36 dB
Noise level (economic mode)	23 dB
Compatible operating systems	Android
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG)
Light source type	Laser
Service life of light source	- h
Focus	-
Throw ratio	0, 25 - 0, 62:1
Fixed focal length	3.7 mm
USB 2.0 ports quantity	3
VGA (D-Sub) ports quantity	0
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Placement	Floor
Product color	White
Market positioning	Home cinema
Cable lock slot type	Kensington
Video color modes	Cinema, Dynamic, Natural, Vivid
Analog signal format system	Not supported
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (standby)	- W
Power consumption (typical)	234 W
Power consumption (economy mode)	178 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
RMS rated power	20 W

Weight and Dimensions

Depth	400 mm
Width	467 mm
Height	153 mm
Weight	7400 g