Air Filter and Air Intake Vent Maintenance
77
d
Place the new air filter with the four tabs facing down as shown.
Attention
Do not force the air filter cover to close with the tabs on the air filter facing
up. Doing so could damage the projector.
e
Close the air filter cover until it clicks into place.
gg Related Links
• "Replacement Parts" p.96
Cleaning the Air Intake Vents
Clean the projector's air intake vents periodically, or whenever you notice
dust on the surface of the vents to prevent the projector from overheating due
to blocked ventilation.
a
Turn off the projector and unplug the power cord.
b
Turn the projector upside down.
c
Carefully remove the dust using a vacuum cleaner or a brush.
To Next Page
Loading...
