Adjusting the Sound Settings (Sound Mode)
43
The projector offers various sound settings to fine-tune the sound quality for
a variety of listening environments.
You can select the mode designed to match your image, or experiment with
the available modes.
a
Sound settings explained in the following section are only available for
sound that is being output from the projector's speaker.
a
Turn on the projector and start a video.
b
Press the button on the remote control.
c
Select the Sound menu and press the [Enter] button.
d
Select Sound Mode and press [Enter].
e
Select your sound mode and press [Enter].
f
Select detailed sound settings such as surround-sound effect and make
settings according to your listening environment as necessary.
g
Press to exit the menus.