Adjusting the Color Convergence (Panel Alignment)
79
• Select Four Corners to adjust the corners of the panel one at a time
and go to step 11.
i
Use the directional pad on the remote control to adjust the color
alignment selected in Select Color, and then press [Enter].
a
Adjustment affects the grid lines in the entire screen.
j
Select one of the following options:
• Select Four Corners to fine-tune your adjustments.
• Select Exit to finish adjustments.
k
Use the directional pad on the remote control to adjust the color
alignment of the screen corner, and then press [Enter].
l
When you are finished adjusting each corner of the screen, press
[Enter].
m
Select one of the following options:
• If your projector needs additional panel alignment, select Fine
Adjustment. Use the directional pad on the remote control to
highlight the corner of any misaligned box on the screen, press
[Enter], make any necessary adjustments, and then press [Enter]
again. Repeat this step as necessary for the other intersections.
• Select Exit to finish adjustments.
To Next Page
Loading...
