EasyManua.ls Logo

Epson EMP-8000 - 1.4. Specifications; 1.4.1. Main unit specifications

Epson EMP-8000
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EMP-9000/8000
1-12Revision:A SEIKO EPSON
1.4. SPECIFICATIONS
1.4.1. Main unit specifications
Table 1-1
OPTICAL FEATURES SPECIFICATIONS
Display method Transparency type poly-silicon TFT color liquid crystal dis-
play (R/G/B three panels)
Optical method Dichroic mirror separation and prism combine method
Projection image size 30 inch ~ maximum 300 inch (Wide angle),
20 inch ~ 230 inch (Tele angle)
Projection distance 1.1m~15.6m
Liquid crystal screen /Drive system Poly-cilicon TFT (MLA built in) 1.3inch (Diagonal)
EMP-9000 :Full lines, 24phase block series
EMP-8000 :Full lines, 12phase block series
Pixels EMP-9000 :1398784x3 (1366x1024x3)
EMP-8000 :786432x3 (1024x768x3)
Focal Lens Manual Zoom lens F1.8-2.4 (49~69 mm)
Focus adjustment Manual
Zooming adjustment Manual(1:Approx1.4)/E zom by remote control(1:Approx4)
Keystone correction ratio 10(Upper) :0(Lower) ~ 5:5 optical axis
Light Source
Life(Lamp inner housing)
discharge lamp
A.C. drive
UHE (Ultra High Efficiency Lamp) lamp 220W
Life 2000 hours (Light 50% or the survival rate 50%)
Brightness EMP-9000 :1700lm(Catalog spec)
EMP-8000 :2200lm(Catalog spec)
AUDIO FEATURES
Average brightness uniformity Typ.85%
Output for internal speaker
Dynamic speaker(3W-8
) x 2 speaker 3D stereo sound:
50~18000Hz, S/N 85db
Audio out Interface External speaker 3.5mm Stereo mini-jack
Internal speaker output is stopped when mini-jack is
plugged.
Output signal:0 to 500mvrms
land imperdance:600ɹ
Audio interface (L/R) x2
(S Video /Video )
Audio signal(stereo) from the video devices. Input interface
is separated with R(Right) and L(Left).
Interface type:RCA jack
Input signal:500mvVrms / 47Kɹ
Audio 1 interface Computer 1 Audio input (stereo)
Interface type:3.5mm Stereo mini-jack
Input signal: 500mVrms/47Kɹ
Audio 2(L/R) interface
REMOTE CONTROL
Wireless remote controller For controlling EMP-9000/8000 operating mode and control-
ling host computer from EMP-9000/8000.
Signal is detected with internal receptor board.
Control range: Within 10 m and 30 degree (Reft / Right), 15
degree (upper /Lower) wide from receptor .
Remote interface For conect to optional remote control receiver (EMPST02)
Interface type : 3.5mm Stereo mini-jack
(The function of Receptor board is stopped when mini-jack is
plugged)
VIDEO INPUT/OUTPUT
Computer 1 interface (input) Host computer RGB output
(0.7Vp-p 75
/ Mac 0.714Vp-p 75
)

Table of Contents

Related product manuals