Epson EMP-8000 - 3.2.8. Main Board Assy Unit; 3.2.9. IF unit

3-11
EMP-9000/8000
SEIKO EPSON Revision:A
3.2.8. Main Board Assy Unit
1. Remove seven screws(Screw, CC M3x6) fixing the Main Board Assy Unit .
2. Disconnect all of cable connectors on the Main Board Assy Unit.
3. Detach the Main Board Assy Unit.
Figure3-11



Caution:
Refer to page.2-14 about cable splicing figure of Main Board Assy Unit.
3.2.9. IF unit
1. Disconnect all of cable connectors on the Driver Board Assy.