EMP-9000/8000
3-10Revision:A SEIKO EPSON
2. Disconnect the Speaker L/R connector on the AU Board Assembly then detach the AU
Board Assembly on the Upper Case Unit. It is fixed in two screws(Screw, CC M3x6).
Figure3-10
3. Disconnect the cable connectors on the Main Board Assy Unit.
4. Detach the Speaker L/R from Upper Case Unit. Each is fixed in the two screws(Screw, CC
M3x6).
5. Detach the Connector Board U Fixing Plate on the Upper Case Unit and detach the Con-
nector Board U on the Connector Board U Fixing Plate. Each is fixed in a screws(Screw,
CC M3x6).
6. Remove a screws(Scerw, CP M3x6) fixing the Operation Panel, then detach the Operation
Panel.]
Speaker LSpeaker R
AU board assembly
To Next Page
Loading...
