Epson EMP-8000 - 3.2.10. IF Panel Unit; 3.2.11. Optical Engine

3-13
EMP-9000/8000
SEIKO EPSON Revision:A
3.2.10. IF Panel Unit
1. Insert minus driver etc. between IF Panel Unit and IF Unit, then remove the notch of IF
Panel Unit.
2. Remove the IF Panel Unit.
Figure3-14
3.2.11. Optical Engine
1. Remove two screws(Screw, CP(S-P1) M3x8) fixing the Lamp Connector Holder, then
detach the Lamp Connector Holder.
Figure3-15
IF Panel Unit
notch
notch