Epson EMP-8000 - 3.2.14. Filter Unit; 3.2.15. Thermistor LAMP

3-17
EMP-9000/8000
SEIKO EPSON Revision:A
3.2.14. Filter Unit
1. Remove three screws(Screw, CC M3x6) fixing the Filter Unit, then detach the Filter Unit on
the Lower Case Unit.
Figure3-22
3.2.15. Thermistor LAMP
1. Remove a screw(Screw, CBP-tite M3x8) fixing the Thermistor OA/LAMP, then detach the
Thermistor LAMP on the Optical Engine.
Figure3-23
LAMP Thermistor