Network Software 119
Network Guide
1239X Emulation
Items Explanations
Emulation Select 1239X.
Font Select a font.
Pitch Select a character pitch.
Code Page Selects the character tables. Character tables contain
the characters and symbols used in different languages.
T. Margin Use this option to specify the distance from the top of the
sheet to the baseline of the first printable line.
Text Use this option to set the page length in lines.
Auto CR Use the automatic carriage return option to perform a
carriage-return line-feed (CR-LF) operation whenever the
print position exceeds the right margin.
Auto LF When you set AutoLF to Off, the printer does not send an
automatic line feed (LF) command with each carriage
return (CR). When on, the printer adds a line feed to each
carriage return it receives.
Alt. Graphic Turns the Alternate Graphics option on or off.
Bit Image With Bit Image set to Dark or Light, your printer can
correctly emulate the graphics densities set with the
printer command. When you select Dark, the bit image
density is high. When you select Light, the bit image
density is low.
Zero Char Select whether the printer prints a slashed zero or an
unslashed zero.
Character Set Select character table.
Set button Saves any changes.
Refresh button Clears any changes and reloads the previous settings.
To Next Page
Loading...
