Epson Expression 1680

28
Setting Up Your Scanner
Installing the Windows 2000 Software
Before you begin, make sure the Expression 1680 is connected to your computer.
Also, make sure you’ve recalibrated your monitor to factory specifications.
This procedure automatically installs your EPSON TWAIN Pro driver and any
software you need for a USB connection. If you’re using a SCSI or IEEE 1394
connection and are configuring your interface card for the first time, you’ll be asked
to install your SCSI or IEEE 1394 driver at the beginning of the installation. Follow
the instructions on the screen to install your driver, or see the documentation that
came with your interface card.
You may be asked to insert your Windows CD-ROM during this procedure. Make
sure you have your Windows CD-ROM available, or know where to find the
Windows source files on your hard drive. If you need help locating your source files,
contact your computer manufacturer.
1. Turn on your scanner first, then turn on your computer.
2. When you see the window on the
right, insert the EPSON Expression
1680 Scanning Tools CD-ROM in
your drive and click
Next
.
1680.book Page 28 Thursday, March 1, 2001 4:28 PM