80
Network Scanning
3. Click the
Utility
tab. Make sure
Select
as default scanner for EPSON Scan
Server
is checked, and then click
OK
.
Installing the Scanner Server Software on
Windows 95 and Windows NT 4.0
Make sure the Expression 1680 is connected to your computer. Also, make sure
you’ve recalibrated your monitor to factory specifications.
If you’re configuring your SCSI interface card for the first time, you’ll be asked to
install your SCSI driver at the beginning of installation. Make sure you have your
Windows CD-ROM available, or know where to find the Windows source files on
your hard drive. Then follow the instructions on the screen, or see the documentation
that came with your SCSI card for more information.
If you need help locating your source files, contact your computer
manufacturer.
If you’re running Windows 95, continue with the instructions in the next section. If
you’re running Windows NT 4.0, go to page 83.
1680.book Page 80 Thursday, March 1, 2001 4:28 PM
To Next Page
Loading...
