Epson Expression 1680

32
Setting Up Your Scanner
Testing the Scanner’s Operation (Windows 2000)
Follow these steps to test scanner operation:
1. Open the Windows Control Panel and
double-click the
Scanners and
Cameras
icon to open the Scanners
and Cameras Properties window.
2. Make sure
EPSON Expression 1680
is
selected, and then click the
Properties
button.
3. Click the
Test Scanner or Camera
button. If the scanner is operating
properly, a Test Successful message
displays. Click
OK
to close the message.
Device Ready
appears next to
Status
.
4. Click
OK
to close the Properties
window.
1680.book Page 32 Thursday, March 1, 2001 4:28 PM