90
Network Scanning
6. When you see the screen on the right, enter
the IP address or host name of the scanner
server in the Network Scanner Address box.
(You can only use a host name if you have a
DNS server on your network.)
7. Click
Test
to test the connection. You see a
message that the scanner is available in the
Scanner Status section of the window. Click
OK
to save your settings.
8. Follow the instructions on page 45 if you
want to install ScanSoft TextBridge Pro,
Adobe Photoshop LE, LaserSoft SilverFast,
or MonacoEZcolor.
9. When you’re done installing software,
restart your computer.
If you need to connect to a different network scanner or change the
timeout setting, you can open the EPSON TWAIN Pro Network window
anytime by selecting Control Panels from the Apple menu, then selecting
EPSON TWAIN Pro Net. You can enter up to five IP addresses or host
names in the Network Scanner Address box.
1680.book Page 90 Thursday, March 1, 2001 4:28 PM
To Next Page
Loading...
