Epson LQ-570e - Page 104

EPSON LQ-570e/LQ-580 Revision C
Maintenance Lubrication
1
04
Figure 6-3. Front Frame Assembly
Figure 6-4. Rear Paper Guide Assembly
Figure 6-5. Carriage Assembly
Figure 6-6. EJ Assembly
Lubricate G-26 between Leaf Spring
8.2 x 0.25 x 15 and PF Shaft Holder.
(1/2 grain of rice)
Lubricate G-26 between Plain
Washer 8.2 x 0.5 x 15 and PF Shaft
Holder. (1/2 grain of rice)
Lubricate G-26 on sliding position
of the Shaft, Release.
(1 grain of rice)
Note: There is 6 lubrication
position on release shaft. Check all
lubrication positions are correct.
Soak O-2 oil into Oil Pad.
(0.65cc to 0.75cc)
Lubricate G-26 in the left hole of the Frame Paper Eject. (1/2 grain of rice)
Lubricate G-26 in groove of Roller Paper Eject Drive at the right side. (1/2 grain of rice)