Epson LQ-570e - EJ (Paper Eject) Assembly Removal; Tractor Assembly Removal

EPSON LQ-570e/LQ-580 Revision C
Disassembly and Assembly Disassembly and Assembly
7
5
4.2.1.2 EJ (Paper Eject) Assembly Removal
1. Press and release both front hooks and remove the paper eject assembly.
NOTE: Both hooks of the paper eject assembly should fully hold the shaft of the
left and right frame assembly.
Figure 4-3. EJ (Paper Eject) Assembly Removal
4.2.1.3 Tractor Assembly Removal
1. Unhook the levers of the tractor assembly from the dowel of the Mechanism frames.
2. Remove the circular shaft of the tractor assembly from the circular grooves of
Mechanism frames.
Figure 4-4. Tractor Assembly Removal
Put both ribs of the paper eject assembly into “C” cut of the left frame
assembly and the right frame assembly and press front down until
both hooks hold the shaft of the right and left frame assembly.