Epson LQ-570e - Easy-to-Use Features

EPSON LQ-570e/LQ-580 Revision C
Product Description Hardware Specifications
1
2
1.2.3 Paper Handling Specifications
o Feeding Method
Friction feed: (front, rear)
Push tractor feed: (rear)
Push & Pull tractor feed: (rear)
Pull tractor feed: (front, rear, bottom)
o Feeder
Rear push tractor, CFS Bin1/ Bin2 (Option), Pull tractor (Option)
and Roll paper holder (Option), Front sheet guide (Option)
o Paper Path
Manual Insertion Front, rear in, top out
CFS Rear in, top out
Tractor Front, rear or bottom in, top out
o Line spacing
4.23 mm (1/6 inch) or programmable in increments of 0.0706mm (1/360 inch)
o Feed speed
n Normal mode:
4.23mm (1/6 inch) feed: 45 msec
Continuous feed: 0.127 MPS (m/second)
5.0 IPS (inches /second)
n Copy mode:
4.23mm (1/6 inch) feed: 66 msec
Continuous feed: 0.092 MPS (m/second)
3.6 IPS (inches/second)
o Input Data Buffer: 64 Kbyte
o Release lever
The release lever must be set according to the following table.
Table 1-6. Release Lever Setting Position
Lever Position Paper path / Feeder Paper / Media
Friction
Manual insertion (front)
Cut sheet
(Single sheet & Multi part), Card
Manual insertion (rear) Cut sheet (Single sheet), Card, Envelope
CSF Bin 1
(High capacity cut sheet
feeder)
Cut sheet (Single sheet), Card, Envelope
CSF Bin 1
(Single bin cut sheet
feeder)
Cut sheet (Single sheet)
CSF Bin 2Cut sheet (Single sheet)
Roll paper holder Roll paper
Rear tractor
Push tractor feed (rear)
Continuous paper
(Single sheet & Multi part)
Push & Pull tractor feed
(rear)
Continuous paper
(Single sheet & Multi part)
Full release
Pull tractor feed (front)
Continuous paper (Single sheet & Multi
part), Continuous paper with labels
Pull tractor feed (rear)
Continuous paper
(Single sheet & Multi part)
Pull tractor feed (bottom)
Continuous paper (Single sheet & Multi
part), Continuous paper with labels