Epson LQ-570e - Default Setting

EPSON LQ-570e/LQ-580 Revision C
Product Description
O
peration
3
5
1.5.2.3 Default Setting
There are some parameters that can be changed by users and will be referred at the time of
initialization of the printer.
o Setting mode
1. Enters the Default setting mode.
The method of selecting language for “Usage of this mode” is printed.
2. Select language for “Usage of this mode” by Font button.
Font LEDs show the language for “Usage of this mode” that is currently selected.
This section will be advanced one by one as the button is pressed and the On/Off/
Blink/2-Blink of those three LEDs will also be changed according to the selection.
3. Press Tear Off/Bin button.
The current setting and the “Usage of this mode” by selected language will be printed
on the paper set in the paper path at that time.
4. Select Menu by Font button.
Font LEDs show the menu which is selected at that time. The selection will be
advanced one by one as the button is pressed and the combination of those three LEDs
status of On/Off/Blink/2-Blinks will be changed according to the selection.
5. Select setting value by Tear Off / Bin button.
Tear Off/ Bin LEDs and Paper Out LED show that menu’s value by status of On/Off/
Blink/2-Blinks. That value can be changed by pressing Tear Off/ Bin button and the
LEDs status of On/Off/Blink/2-Blinks will be changed as the button is pressed.
6. When Tear Off / Bin button is pressed, the printer memorize the last setting value.
7. Repeat (4) to (6).
The other items can be changed in the same manner.
The menu selection will return to the first menu after the last menu selection is over.
8. Turn the printer off.
The setting is stored into non-volatile memory.
Table 1-32. Setting Menu
Item Setting / Value *2
Page length for tractor
3 inch, 3.5 inch, 4 inch, 5.5 inch, 6 inch, 7 inch, 8 inch, 8.5
inch, 11 inch
, 70/6 inch, 12 inch, 14 inch, 17 inch
Skip over Perforation OFF, ON
Auto tear Off OFF
, ON
Auto line feed OFF, ON
Print direction Bi-d.
, Uni-d.
Software ESC/P2, IBM 2390 Plus
0 slash OFF
, ON
High speed draft OFF, ON
I/F mode Auto, Parallel, Option
Auto I/F wait time 10 seconds, 30 seconds
Baud rate
19200BPS
, 9600BPS, 4800BPS, 2400BPS, 1200BPS,
600BPS, 300BPS
Parity None, Odd, Even, Ignore
Parallel I/F bidirectional mode OFF, ON
Packet mode Auto, OFF
Character table Standard version
Italic, PC437
, PC850, PC860, PC863, PC865, PC861,
BARASCII, Abicomp, Roman8, ISO Latin 1, PC858, ISO
8859-15
NLSP version
Italic, PC437
, PC850, PC437, Greek, PC853, PC855,
PC852, PC857, PC864, PC866, PC869, MAZOWIA, Code
MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC774, Estonia,
ISO 8859-2, PC 866 LAT., PC 866UKR, PC APTEC,
PC708, PC720, PCAR 864, PC860, PC865, PC861, PC863,
BRASCII, Abicomp, Roman8, ISO Latin 1, PC858, ISO
8859-15, PC771
International character set
for Italic table
Italic U.S.A.
, Italic France, Italic Germany, Italic, U.K.,
Italic Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1