Epson LQ-570e - Led; Buzzer

EPSON LQ-570e/LQ-580 Revision C
Product Description
O
peration
3
3
1.5.1.2 LED
o Indication in normal mode
*1 Pause (Orange)
-It is on when the printer is paused, and it is off when the printer is not paused.
-It blinks when Micro Adjust is valid.
-It blinks when Head Hod is effective but halted.
*2 Paper Out (Red)
-It is on when the printer is in the Paper out status, and it is off when the printer is out
of this status.
*3 Tear Off/Bin (Green)
-2 LEDs display the status of CSF bin selection when cut sheet is used. Only a right
LED is on when Bin 1 is selected,.
-Both LEDs blink when continuous paper is in the Tear-off position and both LEDs are
off when continuous paper is out of the Tear-off position.
«« : Tear Off
n ¨ : Bin 1
¨ n : Bin2
¨¨ : Card
(
¨ : LED On, « : LED Blinks, n : LED Off)
*4 Condensed (Green)
-It is on when the printer is in the condense mode, and it is off when the printer is out of
condense mode.
*5 Font (Green)
-The status of Font selection is displayed by 3 Font LEDs.
nn ¨ : Draft
n ¨ n : Roman
n ¨¨ : Sans serif
¨¨ n : Courier
¨ n ¨ : Prestige
¨¨ n : Script
¨¨¨ : Others
(
¨ : LED On, n : LED Off)
1.5.1.3 Buzzer
o Paper out error: Beeper sounds (...)*
o Release lever operation: Beeper sounds(-----)*
o Illegal panel operation: Beeper sounds (.)*
* The description (.) and (-) in the above shows how the beeper sounds.
(.): Beeper sounds approx. 100ms and interval is approx. 100ms.
(-): Beeper sounds approx. 500ms and interval is approx. 100ms.
Table 1-31. Indication in normal mode
LED
Pause
*1
Paper
Out
*2
Tear
OFf/Bin
Condensed Font
Printer Status
Pause On --- --- --- ---
Paper out error On On --- --- ---
Release lever operation
error
On --- --- --- ---
Paper eject warning On Blink --- --- ---
Head hot warning Blink
Micro Adjust Blink --- --- --- ---
Tear off --- --- *3 --- ---
Bin selection --- --- *3 --- ---
Condensed selection --- --- --- *4 ---
Font selection --- --- --- --- *5
Fatal error Blink Blink Blink Blink Blink