Epson LQ-570e - Page 32

EPSON LQ-570e/LQ-580 Revision C
Product Description
O
peration
3
2
Figure 1-9. Micro Feed
o Operation at power on
Turning the printer on while pressing panel switches executes the functions below;
o Operation in default setting mode
The following switches are used in default setting mode;
Font
-Selects font.
(Draft, Roman, Sans serif, Courier, Prestige, Script, Others)
-Fonts that are not set at default setting is not selectable.
-If pressed with Condensed SW, reset is performed.
Condensed -Alternates condensed mode and non-condensed mode.
Font & Condensed -Reset paper.
Table 1-28. Operation in Normal Mode
Switch Function
*1 Micro feed backward
*2 Micro feed forward
Head
Continuous Paper Bottom (Front)
Front
Manual Feed Rear/CSF
Continuous Paper Rear
*2
*1
Table 1-29. Operation at Power On
Switch Function
Load/Eject LQ self test
LF/FF Draft self test
Font Default setting
Load/Eject & LF/FF Data dump
Load/Eject & LF/FF &
Pause
Clear EEPROM
Tear Off / Bin & Load/
Eject
Clear EEPROM for Diving Line count for ribbon change timing.
Pause Bi-d adjustment
The others Not available
Table 1-30. Operation at Power On
Switch Function
Font Selects the Menu.
Tear Off / Bin Changes the setting.
The others Not available.