Epson LQ-570e - Page 16

EPSON LQ-570e/LQ-580 Revision C
Product Description Hardware Specifications
1
6
o Continuous paper with labels
Table 1-13. Continuous Paper with Labels
NOTES:
1. Printing on labels is available only under normal temperature and humidity condition.
2. The base sheet of labels must be continuous paper.
3. Continuous paper with labels should be inserted from the front or bottom entrance.
Figure 1-1. Printable Area - Label
o Roll paper
Table 1-14. Roll Paper
Front Entry Rear Entry Bottom Entry
Min. Max. Min. Max. Min. Max.
Label size
See the figure below. --- See the figure below.
Base sheet width
(inch)
(mm)
(4)
101.6
(10)
254
--- ---
(4)
101.6
(10)
254
Base sheet length
(one page)
(inch)
(mm)
(4)
101.6
(22)
558.8
--- ---
(4)
101.6
(22)
558.8
Base sheet thickness
(inch)
(mm)
(0.0028)
0.07
(0.0035)
0.09
--- ---
(0.0028)
0.07
(0.0035)
0.09
Total thickness
(inch)
(mm)
(0.0063)
0.16
(0.0075)
0.19
--- ---
(0.0063)
0.16
(0.0075)
0.19
Label weight
(g/m
2
)
(lb.)
64
(17)
---
64
(17)
Quality
AVERY
CONTINUOUS
FORM LABELS,
AVERY MINI-
LINE LABELS or
the same quality
labels
---
AVERY
CONTINUOUS
FORM LABELS,
AVERY MINI-LINE
LABELS or the same
quality labels
Rear Entry
Minimum Maximum
Width
(inch)
(mm)
(8.5)
216
Length
(inch)
(mm)
- - -
Thickness
(inch)
(mm)
(0.0028)
0.07
(0.0035)
0.09
Weight
(g/m
2
)
(lb.)
52
(14)
82
(22)
Quality
Plain paper, Recycled paper. Not curled, not folded,
not crumpled
63.5 mm (2.5 inch) min.
23.8 mm
(15/16inch)
min.
R_2.5 mm (0.1 inch) min.
Label