Epson LQ-570e - Page 41

EPSON LQ-570e/LQ-580 Revision C
Product Description
C
ontrol codes
4
1
*1 The setting is stored into non-volatile memory when m1=0, 3.
Select character pitch “CP” 02H 00H 00H m1
m1=0(10cpi), 1(12cpi), 2(15cpi), 3 (17.1cpi),
4(20cpi), 5(Propotional)
∆*1
Select draft or LQ “CQ” 02H 00H 00H m1
m1=0(Draft), 1(LQ), 2(High speed draft)
¡
Select character table “CT” 02H 00H 00H m1
m1=0 (Table0), 1(Table1), 2(Table2), 3(Table3)
∆*2
Assign character table “AT” 04H 00H 00H m1 m2 m3
m1=0(Table0), 1(Table1), 2(Table2), 3(Table3)
m2, m3=(ESC/P2 Character Table No.)*3
∆*2
Select an international
character set
“IC” 02H 00H 00H m1
m1=0(U.S.A), 1(France), 2(Germany), 3(U.K.)
4(Denmark1), 5(Sweden), 6(Italy), 7(Spain1),
8(Japan), 9(Norway), 10(Denmark2), 11(Spain2),
12(Latin America), 13(Korea)
∆*4
Set page length “PG” 05H 00H 00H p1 p2 m1 m2
p1=0(Continuous paper), p2=0(Rear),
p1=1(CSF), p2=0(bin1), 1(bin2)
p1=2(Manual insertion), p2=0(rear), 1(front)
-Page legth=m1+256*m2, by 0.0706mm (1/360inch)
1080 (76.2mm(3inch)) <= m1+256*m2 <=
7920(558.8mm(22 inch))
¡
Set Top margin “TP” 05H 00H 00H p1 p1 m1 m2
p1=0(Continuous paper), p2=0(Rear),
p1=1(CSF), p2=0(bin1), 1(bin2)
p1=2(Manual insertion), p2=0(rear), 1(front)
-Top margin=m1+256*m2, by 0.0706mm (1/360inch)
60 (4.2mm) <= m1+256*m2 <= 480(8.5mm +
25.4mm(1inch))
¡
Turn 1 inch skip perforation
on/off
“SK” 02H 00H 00H m1
m1=0(off), 1(on)
¡
Turn unidirectional mode on/
off
“PD” 02H 00H 00H m1
m1=0(Bi-d.), 1(Uni-d.), 2(Auto)
¡
Table 1-35. Bi-Directional Commands
Function Code/ Parameter Save
Turn auto tear-off on/off “TO” 02H 00H 00H m1
m1=0(off), 1(on)
¡
Turn auto line feed on/off “LF” 02H 00H 00H m1
m1=0(off), 1(on)
¡
Select control language “PM” 02H 00H 00H m1
m1=0(ESC/P2), 2(IBM 2390 Plus emulation)
¡
Turn printer state reply on/off “ST” 02H 00H 00H m1
m1=0, 1, 2, 3
-
Inquire printer state reply on/
off
“ST” 01H 00H 01H
“@BDC” SP “PS” CR LF “ST:” <nn>”;” FF
-
Turn Slash zero on/off “EX” 06H 00H 00H 00H 00H 00H 01H m1
¡
Turn Buzzer on/off “EX” 06H 00H 00H 00H 00H 00H 02H m1
m1=0(enable), 1(disable)
¡
Turn IBM emulation A.G.M
on/off
“EX” 06H 00H 00H 00H 00H 00H 03H m1
m1=0(enable), 1(disable)
¡
Turn IBM emulation Auto
CR on/off
“EX” 06H 00H 00H 00H 00H 00H 04H m1
m1=0(enable), 1(disable)
¡
Turn Roll paper mode on/off “EX” 06H 00H 00H 00H 00H 00H 05H m1
m1=0(enable), 1(disable)
¡
Set starting data/month/year “SD” 04H 00H 00H m1 m2 m3
00<=m1<=99, 01<=m2<=12, 01<=m3<=31
¡
Inquire starting date/month/
year
“SD” 01H 00H 01H
“@BDC” SP “PS” CR LF “SD:” <nn1> <nn2>
<nn3> “;” FF
-
Inquire total printing lines/
power on hours
“TL” 01H 00H 01H
“@BDC” SP “PS” CR LF “TL:” “;” “TPL:”
<nnnnnnnn2>
“;” “TPH:” <nnnn3>”;” “TPR:” <nnnnnnnn4>
“;” FF
-
Echo parameters “??” nL nH 01H <chr-str>”;”FF -
Table 1-35. Bi-Directional Commands
Function Code/ Parameter Save