Epson Perfection 1240U - Assigning an Application to the Start Button

1-12
Using the Buttons
Assigning an application to the Start button
To assign an application in the EPSON SMART PANEL window
to the
] Start button on the scanner, follow the steps below.
1. Click the EPSON SMART PANEL for Scanner icon on the task
bar to start EPSON SMART PANEL for Scanner.
2. Select an application from the EPSON SMART PANEL list
box or press the Start button at the lower left corner to cycle
through the applications (clockwise).
The selected application is assigned to the
] Start button.
Note:
❏ The application currently assigned to the
] Start button on the
Scanner has the Start button icon added to its application icon.