6-26
Maintenance and Troubleshooting
If the following dialog appears, click
d,thenbrowseand
select or type in the CD-ROM drive letter, the EPSON folder,
the folder of your preferred language, and the Win98 folder
as the location as shown below. Finally, click OK.
5. The Screen Calibration window appears. Follow the
instructions described in your Startup Guide.
For Windows 2000 users
Note:
Make sure your scanner is plugged in and connected to your computer.
If your scanner is unplugged or not connected to your computer, you
cannot reinstall the driver properly.
1. If EPSON Perfection 1240 appears under Other devices with
a question (?) mark or under Imaging devices with an
exclamation (!) mark, right-click ? EPSON Perfection 1240
or ! EPSON Perfection 1240 and select Uninstall....
To Next Page
Loading...
