2-6
Scanning Basics
2. After EPSON TWAIN has previewed and recognized the
image type, the following window appears. EPSON TWAIN
automatically sets the “Image Location setting” on page 2-7
and “Exposure setting” on page 2-8, and then starts scanning.
If you scan multiplephotos, thenumber of scanned image will
be indicated.
3. The scanned image(s) is sent to the application.
Note:
❏ You cannot scan an image which exceeds the available memory or
disk space. If you try to scan a very large image, an alert appears on
the screen.
❏ Before scanning, be sure to calibrate your screen. For details, see
“Calibrating Your Screen” on page 4-2.
❏ After an image is scanned, be sure to save or export it.
Document Type Recognition setting
The image is automatically recognized as one of the following
document type:
Color Photo: 24-bit color scanning
To Next Page
Loading...
