Epson PLQ-30 User Manual

2. Insert a single sheet into the front slot with the printable side face up until the top part of the paper
reaches the roller inside. The printer loads the paper automatically to the correct position and the
paper is ready to be printed.
Note:
❏ Use paper that has more than 60% reflectance.
❏ Do not load paper that is curled or has been folded.
❏ Do not punch holes in the area from 25.0 to 40.0 mm from the left edge of paper.
❏ When you use paper that is shorter than 110.0 mm, set the paper eject direction to front. The factory
set default is front. Please access http://www.epson.com for information.
❏ When you print a multipart form that is glued at the top, load the glued part first.
❏ Be sure your multipart forms do not exceed 0.53 mm (0.021 inch) in thickness.
❏ Always close the printer cover before printing. The printer does not print when the printer cover is
open.
Adjusting the top-of-form position
The top-of-form position is the vertical position on the page where the printer starts printing. If the
printout appears too high or low on the page, you can use this function to adjust the top-of-form
position.
The top-of-form position can be set for each emulation.
Target Printer Mode Emulation
PLQ-30/PLQ-30M User’s Guide
Paper Handling 19

Epson PLQ-30 Specifications

General

Color	-
Bitmap fonts	Courier, Draft, OCR-B, Orator, Prestige, Roman, Sans Serif, Script
Character sets	ISO 8859-15, PC437, PC850, PC858
Character pitch	10, 12 cpi
Built-in barcodes	CODABAR (NW-7), Code 128 (A/B/C), Code 39, EAN13, EAN8, Industrial 2/5, Interleaved 2/5, UPC-A, UPC-E
Maximum number of copies	7 copies
Maximum print speed (LQ)	195 cps
Maximum print speed (draft)	360 cps
Maximum printing width (columns)	94
Print direction	Bi-directional
Ribbon life (black, LQ)	5 million characters
Ribbon life (black, draft)	10 million characters
Mean time between failures (MTBF)	12000 h
Standard interfaces	Parallel, RS-232, USB 2.0
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	4.5 W
Power consumption (typical)	64 W
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 80 %
Windows operating systems supported	Windows 10, Windows 2000, Windows 7, Windows 8, Windows 8.1, Windows ME, Windows Vista, Windows XP
Product color	Gray
Country of origin	Indonesia
Page description languages	Epson ESC/P2, PPDS
Sound pressure level (printing)	55 dB
Needles	24
Print technology	Dot matrix
Connectivity technology	Wired
Pallet width	800 mm
Pallet height	3710 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	32 pc(s)
Quantity per pallet (UK)	48 pc(s)
Quantity per pallet layer	4 pc(s)
Quantity per pallet layer (UK)	6 pc(s)
Package depth	447 mm
Package width	255 mm
Package height	367 mm
Package weight	9.72 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	280 mm
Width	384 mm
Height	203 mm