Epson PLQ-30 User Manual

6. Press the F1/Eject button to move the top-of-form position up on the page, or press the F2 button
to move the top-of-form position down on the page. Each time you press the F1/Eject or F2
button, the printer makes a short beep. Pressing these buttons executes micro feed in 0.282 mm
(1/90-inch) increments.
Note:
The top-of-form position can be set from 1.0 mm to 33.8 mm.
7. Insert a sheet of A4 paper into the front slot. The printer prints triple H in capitals (HHH) on the
current top-of-form position and ejects the sheet. You may continue to adjust the position by
pressing the F1/Eject and F2 buttons and checking the position by inserting another sheet.
8. After finishing the adjustment, turn off the printer. The setting does not change even if the printer
is turned off.
Adjusting the printing start position
The printing start position is the horizontal position on the page where the printer starts printing. If
the printout appears too for the left or right on the page, you can use this function to adjust the printing
start position.
The print start position can be set for each emulation.
Target Printer Mode Emulation
Olivetti Mode PR2
Wincor Nixdorf Mode WNI4915
IBM Mode IBM4722
EPSON Mode ESC/P2, IBM PPDS, ESC/P2+ESC/MC
Follow these steps to adjust the printing start position:
PLQ-30/PLQ-30M User’s Guide
Paper Handling 21

Epson PLQ-30 Specifications

General

Color	-
Bitmap fonts	Courier, Draft, OCR-B, Orator, Prestige, Roman, Sans Serif, Script
Character sets	ISO 8859-15, PC437, PC850, PC858
Character pitch	10, 12 cpi
Built-in barcodes	CODABAR (NW-7), Code 128 (A/B/C), Code 39, EAN13, EAN8, Industrial 2/5, Interleaved 2/5, UPC-A, UPC-E
Maximum number of copies	7 copies
Maximum print speed (LQ)	195 cps
Maximum print speed (draft)	360 cps
Maximum printing width (columns)	94
Print direction	Bi-directional
Ribbon life (black, LQ)	5 million characters
Ribbon life (black, draft)	10 million characters
Mean time between failures (MTBF)	12000 h
Standard interfaces	Parallel, RS-232, USB 2.0
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	4.5 W
Power consumption (typical)	64 W
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 80 %
Windows operating systems supported	Windows 10, Windows 2000, Windows 7, Windows 8, Windows 8.1, Windows ME, Windows Vista, Windows XP
Product color	Gray
Country of origin	Indonesia
Page description languages	Epson ESC/P2, PPDS
Sound pressure level (printing)	55 dB
Needles	24
Print technology	Dot matrix
Connectivity technology	Wired
Pallet width	800 mm
Pallet height	3710 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	32 pc(s)
Quantity per pallet (UK)	48 pc(s)
Quantity per pallet layer	4 pc(s)
Quantity per pallet layer (UK)	6 pc(s)
Package depth	447 mm
Package width	255 mm
Package height	367 mm
Package weight	9.72 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	280 mm
Width	384 mm
Height	203 mm