Epson PLQ-30 User Manual

IBM4722, ESC/P2, IBM PPDS, and ESC/P2+ESC/MC modes
State of panel lights Beep pattern Problem
Solution
N Power
F Ready
N Offline
There is no paper loaded in the slot.
Load a paper into the front slot.
Paper is not loaded correctly.
Remove the paper and reload it correctly. See “Loading Passbooks”
on page 17, or “Loading Single Sheets” on page 18.
Paper is not fully ejected.
Press the F1/Eject button to eject paper.
N Power
N Offline
The printer cover is open.
Stop the operation and close the printer cover.
N Power
F Offline
— The print head is overheated.
Wait for a few minutes; the printer resumes printing automatically
once the print head cools.
N Power
F Ready
F F1/Eject
F Offline
F F2
An unknown printer error has occurred.
Turn off the printer and leave it off for several minutes; then turn on
the printer again. If the error recurs, contact your dealer.
N = on, F = flashing
= short series of beeps (three beeps)
= long series of beeps (five beeps)
Problems and Solutions
Most problems you may encounter while operating your printer have simple solutions.
You can check the operation of your printer using the self test. See “Printing a Self Test” on page 83. If
the self test works properly the problem probably lies in the computer, the application software, or the
interface cable. If the self test does not work, contact your dealer or a qualified service person for
assistance.
PLQ-30/PLQ-30M User’s Guide
Troubleshooting 75

Epson PLQ-30 Specifications

General

Color	-
Bitmap fonts	Courier, Draft, OCR-B, Orator, Prestige, Roman, Sans Serif, Script
Character sets	ISO 8859-15, PC437, PC850, PC858
Character pitch	10, 12 cpi
Built-in barcodes	CODABAR (NW-7), Code 128 (A/B/C), Code 39, EAN13, EAN8, Industrial 2/5, Interleaved 2/5, UPC-A, UPC-E
Maximum number of copies	7 copies
Maximum print speed (LQ)	195 cps
Maximum print speed (draft)	360 cps
Maximum printing width (columns)	94
Print direction	Bi-directional
Ribbon life (black, LQ)	5 million characters
Ribbon life (black, draft)	10 million characters
Mean time between failures (MTBF)	12000 h
Standard interfaces	Parallel, RS-232, USB 2.0
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	4.5 W
Power consumption (typical)	64 W
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 80 %
Windows operating systems supported	Windows 10, Windows 2000, Windows 7, Windows 8, Windows 8.1, Windows ME, Windows Vista, Windows XP
Product color	Gray
Country of origin	Indonesia
Page description languages	Epson ESC/P2, PPDS
Sound pressure level (printing)	55 dB
Needles	24
Print technology	Dot matrix
Connectivity technology	Wired
Pallet width	800 mm
Pallet height	3710 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	32 pc(s)
Quantity per pallet (UK)	48 pc(s)
Quantity per pallet layer	4 pc(s)
Quantity per pallet layer (UK)	6 pc(s)
Package depth	447 mm
Package width	255 mm
Package height	367 mm
Package weight	9.72 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	280 mm
Width	384 mm
Height	203 mm